Just finished the General purpose factory 2 build. It was an easy build and simply followed my own directions as listed in the sketch set (http://www.trainboard.com/highball/index.php?resources/general-purpose-factory-2.123/). First was printing templates, cutting them out, and using rubber cement, glued to the styrene. cutting window openings with a corner punch prepared windows and door frames for painting (used double sided tape) windows and frames painted (3 light coats) making overhead door trim from .020 x .060 strips (different from sketch set, but it was what I had on hand) cutting window glazing pieces installing window glazing using "Testors clear parts cement and window maker" all walls ready for gluing to base
Glued first 3 walls to base added more walls last 2 walls glued in roofs beveled and glued on trim pieces mitered, cut to length, and glued on "linoleum nails" (Ace hardware) with 4 painted all corner trim done, and roof vents installed one more completed view
Nice build thread Gary. Is the template something you downloaded from somewhere or did you come-up with this design yourself?
The templates are part of my sketch sets Joe. Each set (in the resources section) has downloadable templates to complete whichever project you choose. I drew them all using "Sketch-up" and converted them to pdfs.
