Sadly, the latest news is that three people have died, including the driver and conductor....
How about this scenario. Picture an actual size garden with a G scale railway and in a corner a 1 in 10 scale Christmas village. Maybe a small...
If I understand what you want I think you are off by a factor of about 10. Is what you are thinking is to a model a G Scale garden railway in...
I find it difficult to understanding your requirements without further explanation. What are the units for the 10 x 10 space? Inches are not...
I was also wondering about using Rokuhan track as, in my experience, it is easier to work with than Marklin track. For my own interest I drew up a...
Before I checked Trainboard today, I had done a clean up on my computer, which uses Window 10 and Chrome. The clean up was not connected to the...
Thanks for repairing the Trainboard website. I use the Google Chrome browser and Malwarebytes picked up the problem immediately. (This was on...
I model (more correctly "play trains") in Z Scale. I tried this idea out a few years using Rokuhan track on my dining room table. I always think...
Depending on the complexity of your layout, it may be preferable to have the toggle switch reverse the polarity of the track outside the insulated...
I have tried converting a few Marklin locomotives to DCC using Velmo decoders with not very good results, as they tend to have the same erratic...
The question I have is what exactly is meant by "reverse engineering"? To turn an executable software image back into its original source code is...
If you have two power controllers, one for each oval, when the turnout is set to cross over the power will come from both power controllers. One...
I have a couple of Marklin railbuses, a 8802 Powered Track Cleaning Car and a 88313 Rail Bus with Two Freight Cars. They look good on a little...
On a DCC layout, I control the Rokuhan turnouts layout using DCC Concepts Cobalt Alpha components. To do the switching I use the Universal...
I received my copy in the UK yesterday (Monday, March 27). I have been looking at the Z Bend Track article, especially with respect to fitting...
My apologies. I used the incorrect uncoupler in my Anyrail diagram, a mistake I have now corrected. I am using the R077 straight uncoupler, which...
I have built a prototype of an Inglenook Shunting Layout using Rokuhan Track. This is the layout from Anyrail. [ATTACH] The layout is shown on...
I have made an Ingelnook Shunting Puzzle in Z using Marklin track and rolling stock. It uses the Marklin 8587 uncoupler. Uncoupling going forward...
Thanks Greg. I now see that it is much more complicated than "How to call up an engine if you don't know its number?" as the locomotives in...
Since the original post was made on Dec 13 it is possible that the problem has now been solved. However, I shall add my two cents worth. The...