Hi All, I'm after some measurements. I produced the 3D printed replacement gears for the first version of the Bachmann 4-8-4, the ones with the...
Hi, Has anybody converted a MTH Allegheny to Loksound DCC? This loco keeps blowing its MTH Decoder, and I can't work out why. MTH have already...
Hi all, the issue with them, and other decoder makes, running off at max speed may be because they are not set to DCC only. When a decoder...
Sometimes, and this can effect several other drop in decoders, the point where the decoder makes contact with the frame is not good enough so the...
Thanks Ted
Hi Gatrhumpy, Nope, don't have a 4-6-6-4, just the decoder. Its for a custom project which wont be 'plug and play' hence why I need to know what...
Hi Guys, I've picked up a TSU-4664N decoder, no harness etc, just the decoder. Can anybody guide me as to which of the 5 pins in the plug do...
Another option that works for me is to permanently couple and A and B unit together and install a decoder in just the B unit to power both locos....
And here is the missing part! The C-855B! [IMG] The C-855B shell is now available on Shapeways is anybody wants one to go with there C-855....
I use Shapeways for my metal printing and under their materials page for printing steel they say 'To build steel models, special 3D printers...
Thanks. And yep, the brass is totally worth it. Plus I'm getting fairly good at it now. :) [IMG] The Chassis is an extended Con-Cor...
Finlay, after several years. I have an Alco C-855 in N Scale. I've turned this..... [IMG] Into this. :-) [IMG] The sandboxes are separate...
The good news is all the grabs, handrails, ladders, windscreen wipers, raised walkways and a few other details that are not shown yet are etched...
I will be launching another Shapeways loco very shortly, the drawing work is just about done and the shell will be going for a test print with in...
Hi Andy, I see what you mean, yep there facts suck! And yes the Sir Nigel Gresley record is a great one! I guess you already know this, but the...
Here is the background on the engine.. http://www.spookshow.net/loco2/trix2900.html Out of interest, when you say "full of errors" do you mean...
Here they are in N Scale :) [IMG]
Hi Guys, All sorted. It was the ground wire where I had soldered it to two pins not one. Once I had cut through the link everything worked,...
Hi All, Shapeways have now extended the free shipping offer until Monday and have dropped the $35 Minimum. So it’s free shipping on anything...
Hi, Not yet, so far I have only tested with one board and could not get past connecting the loconet. Yes, I have also checked for shorts. As...
