I do not understand the Zamac frame rot. This Zamac stuff had problems way back in the 1930’s. Surely the metal experts know how to make this...
Just wonder what kind of tweezers they furnish- Wonder if they will service a pair in the parts section.
Mike- I use 1K resistors. I just mount them on a small piece of PC board & glue the PC board to what ever is close an out of the way. For...
Hi Carl, how are things down there in Texas? I have been using ESU Black wire for running between the loco & tender. I mark each wire with a short...
Can you read the manufactures I.D. When you use the 2000 command?
Summer, where did you have to machine the frame, or was it the shell that had to be modified? Seems like Brian was having problems with the...
Up date on ESU’s phone tech support. Only on Tuesday & Thursday 9 AM till noon. Tech guy is Frank.
Opps- forgot to tell about the motor leads— I solder a short jumper wire from the motor and solder it to the board on the top side.
Opps looks like my fat finger put in the wrong part number in my post should be a 58751. When the boards contact tabs do not fit tight into the...
I used the 1980 number, called last Friday about 1 PM EST. I was told the service tech ‘s name was Frank. Send you a PM with my phone # maybe we...
Well do not feel alone. I have a brand new 58751 decoder that my Programer could not find- had to get a second one to finish the project. I called...
I was looking at the the photo on the ESU’s web page and the decoder looked to me to all one piece. After a second look I see decoder mounted on...
This is a decoder for an Atlas legency type locomotive. My unit is an SD35. I am a bit concerned about the components that are on the decoder...
Why are you using a daughter board? Won’t the 58941 just replace the light board on the Kato PA? Might have to make room for a speaker.
Did it ever work-is this some thing new to you?
The piece of tap you see attached to the decoder goes on the decoder’s bottom side. It provides an insulator between the decoder & chassis in case...
Sidney sending you a PM woodone
Sidney. Going back to square one- with your Power Cab what kind of interface are you using? NCE, SPROG OR Digatrax? You stated that you set up the...
Make sure you follow the instructions to the letter. Make sure that the USB ports are on, some windows 10 systems will turn off power to the USB...
Sending you a PM