For those of you that use Atlas track, what track item would you like to see added? Currently there are #6 turnouts, flex, and a 19 degree crossing. I am going to see if I can expand the line a bit. Steve W
Thanks for your efforts Steve!!!! Although I am not running ATLAS track, I am thankful anytime we can expand the offerings of any aspect of Z-scale, especially when we have an inside source.
I voted for #8's, but would rather be voting for #10's. Next in priority for me would be the wye. Then the 90deg crossing. I have little use for a #4, but I'm sure I would eventually use one or two if they're made. Write-in ballot would be for 36" flextrack.
I know this is a fact finding query... but I feel it's worthy of mention that I would vote for all three(#8, 90* and wye) if I could. Thanks for your interest - voted
I voted for a Y next because we don't have any Y's, but we have A turnout. #8 turnouts are nice, but I can slow down and use the ones we have available right now.
Steve, I am not voting because I feel I am not track savvy yet. But it is helpful to see what others write and vote for. Thanks for posting this. Scott
I'm currently switching to Atlas track, I'm wishing for all of them! But I guess we gotta start with small steps...
I think they should do several different pieces of track not like MTL did buy more like Marklin and Rokuhan track pieces so we don't have to mix up track pieces to get what we want!
well i voted for the Y but i would also like to see #8 Y and switches 90 deg 60 45 30 deg crossings and yes please 36 in flex bits. as fo a Other kind of track bit an expando section to use on module joining ends something like 2.5 inches x up to 3 inches and it occurs to me as i am writing this bridgedeck w guardrails flex for cut to length bridge deck or is the rail to big for that hmm?
I only use Rokuhan track. But if I was to vote it would be for the Y wye track piece as that is not available from any Z track manufacturers (I'm pretty sure) James Ian