HO models

Photos of my HO projects.

Sort By: Date

Sort By...

Filters

Type Filters

SD45 MILW 10 gets the black paint applied.
N7CZ

N7CZ

HO models
0 x

SD45 MILW 10 gets the black paint applied.

0
216
0
0
05 Sep 2009
SD45 MILW 10 gets the black paint applied.
N7CZ

N7CZ

HO models
0 x

SD45 MILW 10 gets the black paint applied.

0
177
0
0
05 Sep 2009
MILW 8 progress update. Added in this photo is the engineer's side all weather window, fireman side bell behind the cab, rear weed cutter snow plow, electronic crossing speaker mounting plate. Added the firecracker antenna just after I took these photos. (forgot I had them) I'm down to removing the chains on the hand rails, removing the kick-down plate under the change, replacing the MU stands with correct versions, painting white on the handrails and steps.
N7CZ

N7CZ

HO models
0 x

MILW 8 progress update. Added in this photo is the engineer's side all weather window, fireman side bell behind the cab, rear weed cutter snow plow, electronic crossing speaker mounting plate. Added the firecracker antenna just after I took these photos. (forgot I had them) I'm down to removing the chains on the hand rails, removing the kick-down plate under the change, replacing the MU stands with correct versions, painting white on the handrails and steps.

0
253
0
0
04 Sep 2009
MILW 8 progress update. Added in this photo is the engineer's side all weather window, fireman side bell behind the cab, rear weed cutter snow plow, electronic crossing speaker mounting plate. Added the firecracker antenna just after I took these photos. (forgot I had them) I'm down to removing the chains on the hand rails, removing the kick-down plate under the change, replacing the MU stands with correct versions, painting white on the handrails and steps.
N7CZ

N7CZ

HO models
0 x

MILW 8 progress update. Added in this photo is the engineer's side all weather window, fireman side bell behind the cab, rear weed cutter snow plow, electronic crossing speaker mounting plate. Added the firecracker antenna just after I took these photos. (forgot I had them) I'm down to removing the chains on the hand rails, removing the kick-down plate under the change, replacing the MU stands with correct versions, painting white on the handrails and steps.

3
339
0
0
04 Sep 2009
MILW 8 progress update. Added in this photo is the engineer's side all weather window, fireman side bell behind the cab, rear weed cutter snow plow, electronic crossing speaker mounting plate. Added the firecracker antenna just after I took these photos. (forgot I had them) I'm down to removing the chains on the hand rails, removing the kick-down plate under the change, replacing the MU stands with correct versions, painting white on the handrails and steps.
N7CZ

N7CZ

HO models
0 x

MILW 8 progress update. Added in this photo is the engineer's side all weather window, fireman side bell behind the cab, rear weed cutter snow plow, electronic crossing speaker mounting plate. Added the firecracker antenna just after I took these photos. (forgot I had them) I'm down to removing the chains on the hand rails, removing the kick-down plate under the change, replacing the MU stands with correct versions, painting white on the handrails and steps.

0
197
0
0
04 Sep 2009
MILW 8 progress update. Added in this photo is the engineer's side all weather window, fireman side bell behind the cab, rear weed cutter snow plow, electronic crossing speaker mounting plate. Added the firecracker antenna just after I took these photos. (forgot I had them) I'm down to removing the chains on the hand rails, removing the kick-down plate under the change, replacing the MU stands with correct versions, painting white on the handrails and steps.
N7CZ

N7CZ

HO models
0 x

MILW 8 progress update. Added in this photo is the engineer's side all weather window, fireman side bell behind the cab, rear weed cutter snow plow, electronic crossing speaker mounting plate. Added the firecracker antenna just after I took these photos. (forgot I had them) I'm down to removing the chains on the hand rails, removing the kick-down plate under the change, replacing the MU stands with correct versions, painting white on the handrails and steps.

0
168
0
0
04 Sep 2009
MILW 8 progress update. Added in this photo is the engineer's side all weather window, fireman side bell behind the cab, rear weed cutter snow plow, electronic crossing speaker mounting plate. Added the firecracker antenna just after I took these photos. (forgot I had them) I'm down to removing the chains on the hand rails, removing the kick-down plate under the change, replacing the MU stands with correct versions, painting white on the handrails and steps.
N7CZ

N7CZ

HO models
0 x

MILW 8 progress update. Added in this photo is the engineer's side all weather window, fireman side bell behind the cab, rear weed cutter snow plow, electronic crossing speaker mounting plate. Added the firecracker antenna just after I took these photos. (forgot I had them) I'm down to removing the chains on the hand rails, removing the kick-down plate under the change, replacing the MU stands with correct versions, painting white on the handrails and steps.

0
457
0
0
04 Sep 2009
MILW 9, 15, & 8 lined up to show the different stages. None are complete yet. Each is in a different phase of production.
N7CZ

N7CZ

HO models
0 x

MILW 9, 15, & 8 lined up to show the different stages. None are complete yet. Each is in a different phase of production.

0
165
0
0
31 Aug 2009
MILW 12 (shot the black today)
N7CZ

N7CZ

HO models
0 x

MILW 12 (shot the black today)

0
143
0
0
31 Aug 2009
MILW 12 (shot the black today)
N7CZ

N7CZ

HO models
0 x

MILW 12 (shot the black today)

0
153
0
0
31 Aug 2009
MILW 12 (shot the black today)
N7CZ

N7CZ

HO models
0 x

MILW 12 (shot the black today)

0
156
0
0
31 Aug 2009
MILW 12 (shot the black today)
N7CZ

N7CZ

HO models
0 x

MILW 12 (shot the black today)

0
132
0
0
31 Aug 2009
Proto 2000 4002. Renumbering and era upadate. The 4002 was renumbered to #8 by the Milwaukee. I removed the factory number and added the billboard lettering to fit my era.
N7CZ

N7CZ

HO models
0 x

Proto 2000 4002. Renumbering and era upadate. The 4002 was renumbered to #8 by the Milwaukee. I removed the factory number and added the billboard lettering to fit my era.

2
249
0
0
25 Aug 2009
Proto 2000 4002. Renumbering and era upadate. The 4002 was renumbered to #8 by the Milwaukee. I removed the factory number and added the billboard lettering to fit my era.
N7CZ

N7CZ

HO models
0 x

Proto 2000 4002. Renumbering and era upadate. The 4002 was renumbered to #8 by the Milwaukee. I removed the factory number and added the billboard lettering to fit my era.

0
152
0
0
25 Aug 2009
Bachman Spectrum received 2 coats of MILW orange and baked the paint for 2 hours per side.
N7CZ

N7CZ

HO models
0 x

Bachman Spectrum received 2 coats of MILW orange and baked the paint for 2 hours per side.

0
163
0
0
25 Aug 2009
Bachman Spectrum. This until will be built into MILW 12.
N7CZ

N7CZ

HO models
0 x

Bachman Spectrum. This until will be built into MILW 12.

0
162
0
0
25 Aug 2009
Proto 2000 4002. Renumbering and era upadate. The 4002 was renumbered to #8 by the Milwaukee. I removed the factory number and added the billboard lettering to fit my era.
N7CZ

N7CZ

HO models
0 x

Proto 2000 4002. Renumbering and era upadate. The 4002 was renumbered to #8 by the Milwaukee. I removed the factory number and added the billboard lettering to fit my era.

0
158
0
0
25 Aug 2009
Proto 2000 4002. Renumbering and era upadate. The 4002 was renumbered to #8 by the Milwaukee. I removed the factory number and added the billboard lettering to fit my era.
N7CZ

N7CZ

HO models
0 x

Proto 2000 4002. Renumbering and era upadate. The 4002 was renumbered to #8 by the Milwaukee. I removed the factory number and added the billboard lettering to fit my era.

0
172
0
0
25 Aug 2009
Proto 2000 4002. Renumbering and era upadate. The 4002 was renumbered to #8 by the Milwaukee. I removed the factory number and added the billboard lettering to fit my era.
N7CZ

N7CZ

HO models
0 x

Proto 2000 4002. Renumbering and era upadate. The 4002 was renumbered to #8 by the Milwaukee. I removed the factory number and added the billboard lettering to fit my era.

0
158
0
0
25 Aug 2009
8305.jpg
N7CZ

N7CZ

HO models
0 x

8305.jpg

0
206
1
0
17 Aug 2009
553 gets her new nose
N7CZ

N7CZ

HO models
0 x

553 gets her new nose

0
173
0
0
17 Aug 2009
553 gets her new nose
N7CZ

N7CZ

HO models
0 x

553 gets her new nose

0
185
1
0
17 Aug 2009
553 gets her new nose
N7CZ

N7CZ

HO models
0 x

553 gets her new nose

0
201
1
0
17 Aug 2009
My original SD-10 kitbashed from an Athearn SD-9. It's in tough shape after bouncing around for 10+ years. Several parts are missing and will have to be reinstalled.
N7CZ

N7CZ

HO models
0 x

My original SD-10 kitbashed from an Athearn SD-9. It's in tough shape after bouncing around for 10+ years. Several parts are missing and will have to be reinstalled.

0
183
1
0
08 Aug 2009
My original SD-10 kitbashed from an Athearn SD-9. It's in tough shape after bouncing around for 10+ years. Several parts are missing and will have to be reinstalled.
N7CZ

N7CZ

HO models
0 x

My original SD-10 kitbashed from an Athearn SD-9. It's in tough shape after bouncing around for 10+ years. Several parts are missing and will have to be reinstalled.

0
170
0
0
08 Aug 2009
My original SD-10 kitbashed from an Athearn SD-9. It's in tough shape after bouncing around for 10+ years. Several parts are missing and will have to be reinstalled.
N7CZ

N7CZ

HO models
0 x

My original SD-10 kitbashed from an Athearn SD-9. It's in tough shape after bouncing around for 10+ years. Several parts are missing and will have to be reinstalled.

0
174
1
0
08 Aug 2009
My original SD-10 kitbashed from an Athearn SD-9. It's in tough shape after bouncing around for 10+ years. Several parts are missing and will have to be reinstalled.
N7CZ

N7CZ

HO models
0 x

My original SD-10 kitbashed from an Athearn SD-9. It's in tough shape after bouncing around for 10+ years. Several parts are missing and will have to be reinstalled.

0
169
0
0
08 Aug 2009
My original SD-10 kitbashed from an Athearn SD-9. It's in tough shape after bouncing around for 10+ years. Several parts are missing and will have to be reinstalled.
N7CZ

N7CZ

HO models
0 x

My original SD-10 kitbashed from an Athearn SD-9. It's in tough shape after bouncing around for 10+ years. Several parts are missing and will have to be reinstalled.

0
179
0
0
08 Aug 2009
N7CZ, Aug 8, 2009
Kurt Moose likes this.
Page 2 of 2
    There are no comments to display.