What's on your workbench?

JR59 Jan 29, 2006

  1. kevsmith

    kevsmith TrainBoard Member

    1,976
    4,712
    63
    Took our Brooklyn to Barrow Hill the other day and found 'Alycidon' prepped ready for a move on the mainline

    [​IMG]

    Seen later light Engine though Lockoford Lane at Chesterfield

    [​IMG]

    Going to have toi get him a smaller hi-Vis vest!

    [​IMG]

    Following in my footsteps perhaps?

    [​IMG]

    Kev
     
    HemiAdda2d, Kurt Moose, DB_Z and 4 others like this.
  2. ddechamp71

    ddechamp71 TrainBoard Member

    2,153
    653
    46
    These good ole' Class 20, that once ran on my neighbouring railroad (now closed :mad:) in deep France... And the young engineer-to-be looks happy...:D

    Dom
     
  3. drken

    drken TrainBoard Member

    343
    193
    18
    Progress on the building front:

    I've upgraded the NJAA observatory to animate the dome so it turns. The dome now consists of 3 parts, with the 2 hidden parts consisting of a light shield to keep the interior lighting from leaking out the sides of the dome and a motor mount to connect the dome to the motor shaft. I installed a short NEMA stepper motor and will be driving it using a standard "stepstick" stepper motor driver, normally used for 3D printers, because they're cheap and have microstepping ability. I'm also using an Adafruit DS1307 Real Time Clock so I can have the dome follow the sky as well as other effects. It's in black and white as I have a short length of black PLA that I'm using for small stuff until it runs out. Interior lighting will be dimmed 3mm red LEDS.

    Observatory Front.jpg Observatory Side.jpg

    Also, I'm also building actual rail infrastructure. Here's the Hudson and Manhattan Powerhouse. The real one is in disrepair, but is supposed to be renovated into an art center. On my layout, it's going to be used as concert space with a sizable lobby that is used as a bar. Designed using Fusion 360 and printed on a LulzBot Mini, it's still short a few details, such as frames and stained glass for the windows. The plan is to print the windows onto transparencies using a inkjet printer and build the frames off the same pattern. Interior lighting will be designed to simulate a concert using addressable RGB LEDs. I haven't decided exactly what that entails or how I'm going to do that, but it's going to be a fun challenge.

    Powerhouse front.jpg Powerhouse Back.jpg
     
  4. bostonjim

    bostonjim TrainBoard Member

    846
    1,105
    27
    These are two really nice projects. Particularly the converted power plant into performance space. Be sure to have it close by a commuter rail station or PCC stop. Elevated trains would be pretty nice, too. Keep us posted with your progress. I have ideas about a similar project, tho not as grand as the power plant. I want to have the sound of live music coming from the building along with lights flashing. I'm modeling a roadhouse anywhere on the eastern shores, circa 60-70's. I'll be tuned into your progress. Like you, I'm not sure what it all involves but it is enjoyable finding out. Good work!! Jim
     
  5. drken

    drken TrainBoard Member

    343
    193
    18

    Flashing lights, I can do. I've even figured out how to control addressable ones via DCC (various technical issues make this more difficult than you'd think). What I want to do is rig moving mounts for the lights with a servo and maybe put a smoke machine in there. But, however you want to do it, I've found an Arduino (or similar) microcontroller is best. If you just want to have a bunch of regular LEDs in various colors flash on and off in sequence, that would be quite simple. Music players, I'm not so familiar with, but there are various inexpensive devices to play sound files, just so long as the file type is not MP3. Those tend to be a bit more pricey.
     
    bostonjim likes this.
  6. bostonjim

    bostonjim TrainBoard Member

    846
    1,105
    27
    Hi, drken
    I like your plans for the power station. You clearly know a lot more than an I do on how to make things happen. I am going with the woodland scenic system. I'll deal with all the hubs and wires at a later date. I have 4 separate lights in the front of the club. The main hall will have some synchronized flashing lights. I have used the MTL Company store and house kit as the seaside roadhouse. I wish I bought a few more of these kits. The store can be used on any main street. The power plant build has many possibilities for sound, lights, special effects...a subway stop on an elevated track would be a good way to work in some trains. It would look like the old Boston Garden. The L Street power plant in my hometown is being repurposed into a huge luxury community along the reserve channel. It will include open space along the channel. An actual performance center would be a great idea for one of these buildings in real life. Lots of them are coming off line. You may be onto to something. Jim
     
  7. drken

    drken TrainBoard Member

    343
    193
    18
    Well, the real H&M Powerhouse isn't actually near any of the PATH stations, although one of the tunnels runs under the street next to it. It's in the middle of a triangle of stations, about 1/2 mile from each. It used to power the entire H&M system until they shut it down and started putting transformers in it. But, it's going in at the entrance of the main station (modeled after the Erie Lackawanna Terminal in Hoboken, in reality about a mile north). So, all the trains will run past it at some point. Besides, except for the World Trade Center, most PATH stations are quite unremarkable.

    I've never used the Woodland Scenic lighting system, but it definitely looks very useful to those who aren't that familiar with wiring. Just plug and play.
     
  8. shortpainter

    shortpainter TrainBoard Member

    278
    900
    20
    Almost done with my first EMD TR4. The body and frame for both units are 3D printed in brass. The trucks and fuel tanks are printed in plastic. Rokuhan Shorty chassis B Shinkansen is the source for the motor and running gear. The B unit still needs it's truck and fuel tank details attached. A few more touch ups to the paint and it will be ready to go.
    tr4a.jpg tr4ab.jpg
     
    bostonjim, Kurt Moose, ZFRANK and 3 others like this.
  9. Kurt Moose

    Kurt Moose TrainBoard Member

    9,813
    14,199
    147
    Wow, that's good lookin'!!(y)(y)(y)

    The Milwaukee Road actually used these sets on Mica Hill out of Spokane, WA pushing freights which had steam power. I believe the UP did the same over Summit in California.
     
    bostonjim, NScaleKen and jdmter like this.
  10. kevsmith

    kevsmith TrainBoard Member

    1,976
    4,712
    63
    Thanks Frank

    Finally got some Tamiya 'Smoke' Acrylic and it does work, even brush painted. I've done one of the Mk II Coaches that already had the glazing in so couldn't spray it but now its dried it looks alright. In future I'll spray the inside of the glazing strips before mounting them. The result looks a lot better than just clear glazing as the tinted windows really stand out on later British rail coaching stock

    Kev
     
    ZFRANK likes this.
  11. ZFRANK

    ZFRANK TrainBoard Member

    933
    549
    28
    Hi Kev,

    Looking forward to see some pics.

    /Frank

    Verstuurd vanaf mijn ANE-LX1 met Tapatalk
     
  12. shortpainter

    shortpainter TrainBoard Member

    278
    900
    20
    Animek Kenworth T800. I'm pretty used to dealing with small parts when it comes to Z Scale but this thing pushed the limits!

    IMG_0161.jpeg IMG_0167.jpeg IMG_0163.jpeg
     
  13. Kurt Moose

    Kurt Moose TrainBoard Member

    9,813
    14,199
    147
    Beautiful work!!

    (y)
     
    jdmter likes this.
  14. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    Nothing, sorry (I posted my picture in the wrong scale.....).
     

    Attached Files:

  15. animek

    animek TrainBoard Member

    713
    109
    27
    Push the limits !? In a bad or in a good way ?
    Because I wish I would have done those colors, yours look way better than mine.
     
    jdmter likes this.
  16. shortpainter

    shortpainter TrainBoard Member

    278
    900
    20
    In a good way. I greatly enjoyed building this model.
     
    jdmter likes this.
  17. southernnscale

    southernnscale TrainBoard Supporter

    522
    1,171
    29
    If I was to use some of showcase miniatures truck parts I could make this 3D print model look great! tri wheel dumper moves up and down!
    IMG_8320.JPG
     
  18. bostonjim

    bostonjim TrainBoard Member

    846
    1,105
    27
    Wow! Great job. Great paint. I've done several of Animek's kits and I know how tiny some of the parts are. The ladder truck is right up there for pushing the limit. It goes great with Twin Whistle's New England firehouse kit. I'm amazed at the accuracy of these kits and the number of parts per kit. You've mastered them. Jim
     
    southernnscale and jdmter like this.
  19. ZFRANK

    ZFRANK TrainBoard Member

    933
    549
    28
    Hi all,

    Let's revive this interesting thread... I have just picked up some parts from Shapeways.
    See my work in progress on my MTL D&RGW GP9 pilot:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
    The MTL coupler will be attached to th eshell with a small piece of brass as an interface.

    And I needed a couple of oil drums...
    [​IMG]

    All is designed in Sketchup and printed by Shapeways in Fine Detail Plastic (Smoothest).
    I did only clean the parts with some water/dishwash detergent in an ultrasoon cleaner. Afterwards just covered with some spray primer. No sanding done. It looks that Shapeways print quality is improving.

    /Frank
     
  20. Kurt Moose

    Kurt Moose TrainBoard Member

    9,813
    14,199
    147
    Dang, those pilots are awesome!!!(y)(y)(y)

    That's a great investment there!;)
     

Share This Page