Hi I have a Rokuhan controller for my Z scale track I have added some images as i cant see how to attach the controller to the track without cutting into the track, Could some one please help me sort this out I have just had my locco delivered .. so excited but cant run it . Thanks for any help sorry im a newbie
With some/most Rokuhan straight track, the center of the roadbed slides out, and you insert the power connector right there. -Matt
You don't mention track type. But someone has sold you a Rokuhan feeder which slides into the track as shown above. You also show wired joiners which connect in place of joiners see my examples on this page https://zscalehobo.com/atlas/atlas_2092.html Summary Rokuhan track if you have straight tracks - plug feeder into straight track slot Rokuhan track if no straights (or also for Märklin if no feeder track)- use soldered joiners to connect in case there are no straight tracks with feeder slots. You will have to supply a harness conversion (trim an A008) from the controller to the soldered joiner wires. Märklin z track - use an 8590 feeder or the soldered rail joiners.