N Scale Ender's Cabin 2015-10-21

A get away cabin, for the woods

  1. gary60s
    Plan created by Trainboard member @gary60s . The download ZIP contains the full plans, images and templates.

    In chat, Ender mentioned that he was ready to do another scratch building. He provided a neat pic of a cabin in the woods. I've had many requests to do cabins, but just never got around to it. This is my own design, and is not exactly like Enders cabin, but it is so ultra simple to build. Footprint is 2 1/4 x 1 1/2. If you have a spot with uneven terrain on your layout, you can carve a sub base to match the terrain, but leave the top flat, so you can mount the cabin on it. Just use the base template as a pattern.

    It can be done in wood but sketches are based on styrene thicknesses. If you use another material adjust dimensions accordingly. Paint parts before assembly, except where the edges glue to other parts.

    The building directions and materials are in the sketches, and to make your build easier you can enlarge them to full size and print them out. Read directions in assembly sketches before cutting out parts as you may want to change some sizes or cut fewer, or additional, openings. Included sketches are: Overview sketches, Parts templates, Assembly sketches, and PDF's.

    To print the part templates actual size, use the PDF's. Select best printer quality, set PDF zoom to 100%, and page scaling to "none" or actual size. Check your printed page to see that 3" lines are exactly 3" long. Once you have template printed, you can cut with scissors (leave a 1/8" border) and arrange on your material for maximum sheet usage. Part templates for siding are a mirror image, when needed, so that you can cut walls with siding side down (easier to cut). Be sure siding grooves are oriented correctly. Use rubber cement or Krylon Easy Tack Repositionable Adhesive to glue paper templates to your material and then just cut on lines. No measuring ! Paper comes off easily.

    Cut out parts carefully using a SERB and straight edge. The best way to cut out window openings is with a corner punch. It is important to follow assembly sketches IN SEQUENCE or some parts may not fit.

    Images

    1. Img 1.jpg
    2. Img 2.jpg
    3. Img 3.jpg
    4. Img 4.jpg
    5. Img 5.jpg
    6. Img 6.jpg
    7. Img 7.jpg
    8. Img 8.jpg