So looking through info on both the CRHS website and the Conrailcyclopedia it looks like 7006 was not rebuilt into a GP10. Makes sense as the...
There was a company that went by the name of Raintree Poducts that produced a cast resin HH GP30 shell. That was years ago though. These pop up on...
That's entirely your call. I've contemplated doing the same myself.
If memory serves me correctly I used 1mm thick styrene sheet with the width cut so that it fits inside the molded on spike heads in flex track....
Check the motor tabs where they contact the decoder. I've a IM SD40-2 that has to have the motor tabs adjusted every so often. The other 5 I have...
I'd be very careful with the acetone. There's got to be an easier more plastic friendly solution. The debonder is only likely damage the finish of...
This particular Trinity spine car started production sometime in 1997. Everything I have read on these is that they are similar to earlier Trinity...
As mentioned above good cleaning might help. I also wonder if one or more of the universals are slipping on the shaft that spins the worm gear...
Don't forget V-Line produced an A and B sharknose shell as well.
I see unopened moving boxes and the three 3'X4' sections of the old layout sans scenery I am replacing thanks to a move and a bigger layout space.
He was at our clubs event several years ago. Speaking with him he was indeed getting ready to make that move. I can't remember year sorry.
I've heard "the hobby is dying" for 30 plus years now. With adding several new manufacturers, better running locos, DCC/sound, and finer detail...
My guess is it's a custom paint job. A few minutes of googling turns up no other mention in other than this listing. And if it were rare or...
Yeah that Medusa kit drives me crazy. It is better suited for a distribution center for cement power taking it in by rail and utilizing trucks for...
A couple quick notes on shipping. Since the 3 kits from Masterpiece Modules were unassembled the shipping box has a higher density than a...
Even though it's a 1954 model the N scale Classic Metals mixer could work for the late 1970's. I ran a ready mix plant in the mid 1990's. Along...
I have built several. As mentioned above hiding the seams on the concrete silos on the ADM grain elevator took a litltle work. Other than that I...
Let me see what I can do.
Are the trip pins still installed in the SD35's couplers? With that sharp a curve radius the trip pin will overhand the outside corner rail and...
Good morning everyone, Just a reminder that the 13th Annual Ohio N Scale Weekend will be Saturday and Sunday May 21st and 22nd this year with...
