You have to be careful when moving functions around like this. The reason is that certain functions have been assigned by the original project to...
Another alternative is to go over to the Loksound group on groups.io and see if you can scare up somebody local to you that has the hardware. I,...
Can you or someone provide a link to that project please? Thanks. George
Incidentally, this circuit works on both DCC and DC. With DCC both LEDs light. On DC, one or the other lights up, depending on the DC polarity....
Correct! I checked the absolute maximum reverse bias spec on a green SMD LED recently and it was only 5 volts. Wouldn't last long in a DCC...
Wiring LED into DCC circuit
In the JMRI Roster window select the loco. Then click the Labels and Media button. Add labels for the missing functions. Should work after that....
Here is a photo of the PCB that contains detectors and emitters as obtained from JLCPCB.com. Five of these boards for $2 with excellent quality....
I use simple SMD phototransistors as detectors. Yes they are sensitive to ambient radiation. But they are naturally shaded by a car body when that...
I'll get you some pictures in about a week as I need to get my DSLR back to get some quality close up photos. I had JLCPCB build my prototype pcbs...
After the new install of JMRI are your signal heads still working as controlled from JMRI? When you look at the CMRI Command Monitor in JMRI does...
Sorry, reading back through the thread I see that you are receiving data. Apparently you are not seeing a bit toggle in that data. Have a look at...
You did turn on polling, right? George
I devised a scheme to make the narrow shank Sergent ENC87 couplers center themselves in an Accumate scale size box (If you can find some). See the...
Cru: I had to actually LOL when I came across your design, originally on the Model Railroader forum. I laughed because I had been working off and...
