This Atlas kit resides on on of my Ntrak modules
'Ello all, I'm in Wisconsin and I've spent a few months lurking here in the Z scale subforum, so it's probably time I make an account so I can...
The hillside on the scenery window box was built up with the same type of insulation board that has been used in other parts of the layout.
Some scraps of fiberglass reinforced plastic paneling were glued into place with Liquid Nails adhesive to round out the inside corners at the back...
After the fit was tested and verified, the entire insert was sealed with some paint leftover from house painting projects.
A box was made from 1/4 inch and 1/2 inch plywood that fit right into the part of the window behind the layout. The can be lifted up and out to...
I have a 10'x16' shed (outside dimensions). It's wired for power. I had istspray foamed this summer when I had my attic done. My basic idea is a...
A frame was made from strips of 1/2 inch plywood to mount a Showcase Express display case. The frame allows for the space for the mounting...
This cafe was kit bashed from a DPM Otto's Parts kit. The second floor was removed and the walls were angled to fit the space available on one of...
This was built from American Model Builders kit # 602. It was my first wood kit and was on one of my Ntrak modules for many years. It is shown...
This is one of a pair of apartment structures that come in Greenmax kit # 44. This photo was taken right after I built them in 2009. These were...
This is the Walthers Cornerstone shallow relief kit of an old apartment building. I built it around 2013 without any modification but did add...
The Battle Mountain section was installed and the temporary end loop section was moved. Industries at Battle Mountain are still being worked on.
This is right after the Harney section was installed into the layout. The tracks have been connected to the existing layout and to the test loop...
This industry was created from a Walthers Glacier Gravel Co. kit with additional parts added. It represents a track side facility that receives...
This is a Randy Brown kit. I built it without modification but added a lot of details and the interior is lighted. This is on one of my Ntrak...
Paul's Sanriku Type 33 train stops at the station on my Hot Springs junction module.
This section house is in Battle Mountain on my current layout. It was built from a Fox Valley laser cut wood kit.
