Molex .093" & .062" series connectors.
10 Pin IDC Connector with flat ribbon cable.
I'm wiring these DS64's for easy panel wiring. Per my schematic: http://www.trainboard.com/railimages/showphoto.php/photo/99470/ppuser/7443
Mounted on a four position decora style light switch cover. The PM42 is affixed to a 1/4" hardwood strip that is attached to the decora...
DS64 wired with eurostyle terminal strip. The purpose of this setup is to make it easy to wire panel lamps and push button switches.
DS64 wired with RJ45 connections. Each 8 conductor jack is connected to two tortoise motors.
The wiring mess, mostly from track feeders routed to each of eight Tortoise motors to switch power for the frogs.
The stationary decoder again, this time wired up.
Wired up track buses for Module 3. Seven tracks requires fourteen wires.
Wired up track buses for Module 3. Seven tracks requires fourteen wires. Note the little blue line from track #3 (red) to the screw holding the...
Wiring for the staging deck's permanent framing completed. Including plugs which will go onto sectional modules when they're in place. Looking...