David Smith's instructions on burying Micro-trains switch machines

Ajayrav Nov 2, 2016

  1. SJ Z-man

    SJ Z-man TrainBoard Member

    2,832
    712
    51
    Not sure of the colors (they are *just* cut off on the right). It should be easy to trace to each end and the one trace that goes to both is the ‘common’ that would not go to the switch but connects to all others and to one of the Accessory terminals.
    The center terminal of all the switches then go to the other Accessory terminal.

    if you don’t want to use a Toggle switch, you can use 2 momentary (‘NO’ for Normally Open) but a little more wiring to connect the 2 switches first, then to the Accessory bus.

    You can also use electronics to do it (see the other post)
     
    Last edited: Oct 6, 2021

Share This Page