Don't own any Digitrax sound decoders, and wasn't referring to a sound decoders. I own lots of regular Digitrax as well as TCS, some Zimo, and...
And why not, Digitrax makes a very good DCC decoder. Someone that purchases a DC only version might want to install a DCC decoder sometime down...
The first thing I did was to check if the body was installed correctly. The couple on my loco was sitting at a angle. I removed the coupler and...
I used MT trucks with couplers when I upgraded all my older rolling stock. The only couplers I don't like and change out is the Kato brand.
I received one of mine yesterday. Loco runs pretty good, 1 smph - 65-70 smph. Rear coupler a little high, wipers needed adjusted, prime mover...
The big difference is the motor not the gearing, if you install a Atlas SS motor in a Kato loco it will run just like an Atlas loco.
Merry Christmas everyone! Getting with Gift Certificates 2 - SDP40Fs sound equipped, and 2 - BLI PA1s.
I own two Atlas S2s, they run super slow and very smooth. So there has to be something wrong some where.
From the video I seen it looks like there is more frame material add to both ends past the fuel tank, in fact there is a slot in the frame to...
I was planning on purchasing two of these and didn't want them so far off I had to speed match. I run like locos together, and have only had to...
Really, there that far off you need to speed match like locos?
A friend of mine owns a Bachmann non DCC version GG1 with a Digitrax decoder, it runs circles around the Kato GG1 at real low speeds, also with a...
No, your not alone I will purchase several.
Like I said use a thin blade screwdriver, worked for me, and I never harmed a single car. [ATTACH]
If that is a 90 ton Atlas hopper, the loads have three rods that extend down to a round weight. Some of these cars have the weight and rods glued...
Well the price was right so I pre-order one.
The people on these forums = a very small percentage of the people modeling n-scale. I am quite happy with my factory installed sound decoders and...
Neither Kato or FVM to my knowledge come with sound already installed. Most people that want sound in there n-scale locos would rather have it...
I usually purchase power supplies for projects like that from a surplus electronic store.
I have a couple hundred Atlas locos and all have DCC decoders that I have installed. I have never had to solder the motor connections. I make...