I got some 330 1 watt resistors, and did a test just to see if they would light, and they did. I havent done a long term test on them yet, just a...
These are 30 milliamp bulbs. After doing some searching, I came up with 330-350 ohm resistors. What do you think?
I am trying to get a 1.5 Miniatronics bulb to work off my FL4. I know the FL4 is 12V, I have an LED working on it right now. I need to step down...
It changed the rate of both flashing beacons.
Changing CV 59 worked, and it only controlled the flashing lights, not the front or rear headlights. Thanks
I successfully installed a TSU 1000, speaker, and all my lights in an S Scale GP9. However, I need help with some things. Decoder works fine,...
Tried that. D NR hooked up in the caboose, wired directly to the Zephyr on regular track outputs, and the program track outputs
Good news and bad news. I got it all programmed up using my Zephyr. Changed the address, set all the CV's, and it worked fine. Installed it in...
I want to put a four function TCS lighting decoder in an S Scale caboose to control directional ditch lights and warning beacons. The only DCC...
I'm building a set of porch mounted ditch lights in S Scale. I bought a set of HO scale lights to measure, but I could only fid pilot mount. I...
Finished Product Here's what I started with. This is an S Helper Caboose [IMG] I removed the roof rails and grab irons, filed off all the...
What are you priming with? I was planning on using Testors spray can primer even for acrylic paint, but if there is something better, let me know
Im getting back into modeling again, Im selling all my N Scale stuff and getting into S Scale. Planning on having a Granger short line type...
I need a pic of an end bridge abutment(or the beginning, the part that goes into the ground and holds ip the end of the bridge). for a plate...
Nice work. My plan is very similar, and its a very similar sized layout. Thanks.
This is kind of my plan. It'll be 8'6" total width. One leg of the "U" will be 42" inches wide, the other will be 30," and it'll be 7ft long....
Took my old 14'x4' layout in my garage down. It was my first N scale layout and I just wasn't happy with it. Besides, I use my garage to build...
Amen to that. SPINE CARS AND 89' TOFC FLATS. Deluxe, are you ever going to produce yours, or are they just to tease us? More commercially...
In the next couple of months or so, I'm going to start my new layout in the house, and tear down the old one in the garage. My garage layout is...
Can I just pull the old carpet out, lay carpet tape on the padding, and tape the new carpet tiles to the original padding?