I would rather not use the fast track myself, but my layout is large with one circle 375' of track. I use Gar-Grave on all 0 gauge , I love my MTH...
I use a dremil
The best repair man I have found "lionel repair station" <gkosanovich@bellsouth.net>
Twisted my arm, will go to 16 gauge feeders
Have a large square 100x100 feet, suspended from the ceiling, O-96 curves in corners. 10 gauge main wire s with 18g feeders every 6'. In the...
I am currently using DCC in HO gauge, would like to add DCC to an O gauge I am building in the next few weeks. Would like to use computer control...
The attach image contains current table layout. The N and O gauge are complete. Notice that table is 6" lower than the other table. using Peco...
TY, just ordered 10 boxes. Hope it is enough :)
Does the Peco 100 flex track allow both rails to slide or is one fixed klike Micro'a? Does the Peco track come with prdrilled holes in some ties...
While I am new to DCC myself, I went with the Lenz system have used one of their decoders. Also use Digitrax block and switch controls with double...
While I am new to DCC, here are my observations. 1. Manuals poorly written. 2. While I have gotten a LENZ system to work with other manufactures...
Bachman all the way
I need to change the couplers out on 12 cars and 2 engines. The ones shipped are garbage. Any suggestions as to the best brand to use? N scale
Their database is still running on DOS. :ru-tongue: I was going to do ordering for the store online but it required a modem.
The problem is with two of the long coaches hooked end to end they jump the track on 18" radius. One is fine or if I put a shorter car between...
These have stationary single axle trucks and I would like to change them to dual axle self centering. Which truck would you use?
Here is the total section
The crossing is insulfrog, and the switches are electrofrogs
Actually I think the two short straight tracks between the switches would have to be as it is designed to run two trains, one on each circle or...
I am new to DCC and HO. In fact I have been out of trains for 30+ years and then it was all Lionel. I am using a Peco Streamlin code 100...
