The wires coming off the trucks “your red arrow” is one rail and the other rail is picked and sent through the frame and that is “your green...
This is just plain smart, digitrax got the decoder finally and now you can just keep making locos to use the same decoder. This way as soon as...
That's great no master reset I knew there was something funny about them decoders. When I first got my HO Challenger I had some of the same...
I am narrow minded you might say been doing HOn3 now for about 2 years and before that Nn3 for 12. As for RTR locomotives, Blackstone has...
I knew it was only a matter of time. We are going to see alot more sound decoders for N scale now and I am sure that more factory installed sound...
This is where I got mine. http://www.kaptontape.com
Don't Panic here is what you do put it on the programing track and make sure you are in DIR mode program CV125 to a 1 this will restore it back to...
I have not played with this feature sounds like you are doing exactly what you should be doing though. Programing on the main or programing in...
These have an MRC decoder in them same as the HO version. These decoders do not support readback so keep track of what CV's you change. Also you...
I like this kit as well I got one when they were released. I would have liked to have had another one, but as it has been said they where limited.
Yes this is 3 foot narrow gauge in N scale
As Doug knows me and has seen my AutoRack Drag I run them all ConCor, RC, Athearn, MT, and Atlas. I have over 100 of them and run about 40 to 50...
I use track voltage with a cap so the lights will not flicker.
One thing that was not asked what mode are you in? I do all my programming in paged mode so that's how I will go with this reply. I have had...
There is a CV that resets the decoder to the factory settings and is outlined in the Soundtraxx Manual for there decoders. In the manual it tells...
This picture was taken from Litchfield Station. His setup was slightly different then mine but mine works just fine. I relabled all the...
Did you get an answer to this problem? There is documentation out there on how to fix this problem. If you have not found it or still have the...
Thats kinda what I thought I am using winxp and the MS100 works but the locobuffer usb looks that much better I will check the yahoo group and see...
I just want a simple answer from those that use this combo of the JMRI software with the locobuffer. How often do you receive timeouts when...
We bought the PC board that had photo resist on them by mistake but all you have to do is set them in the sunlight or any UV light source to break...