Milwaukee 6A & 6B in new paint
Modified V-line shell and LL mech.
The steps on the engineer side are now complete. The thread plate, nose and cab are not attached they were just positioned in place for this...
Here's is a mock up of the front of the unit with the cab, nose and front section thread plate. With the work on the engineer's side complete I...
Here is a mock up of the cab, nose and pilot together with the thread plate assisting as a position guide..
I positioned it next to an Athearn SD40T-2 for a length comparison. It's beginning to come together even though there is tons more work left to do.
Got quite a bit done on this unit. I did some major adjustments to the entire walkway. The pilot has been tact in place so I can now begin work on...
I shot some primer on the cab. Doors still swivels freely and closes flush. Now for the rear of the cab.
The first cab door is now on and swivels reasonably well. These cannon doors are so delicate, I broke it a couple times however I've some how...
OK so I'm also working on this project, as mostly scratch built SP SD45X. Here is a two in one shot of the unfinished cab with the battery box...
Here is a photo of my SD45X project still in the early stage. It will be built from styrene sheets and Details West as well as Cannon &...
Some HOn30 cars..
In process scratch built HOn30 stock car.
Wing Wall on west side of train room. The 24ft wall will have the staging tracks up to the HVAC closet.
This photo is of a 11" x 5" diorama of an old and abandoned coal tower