Blog draft and Facebook

Jim Wiggin Apr 17, 2011

  1. Jim Wiggin

    Jim Wiggin Staff Member TrainBoard Supporter

    4,870
    2,620
    94
    Ok, another dumb question from the technology impaired department. I spent the morning working on a new entry and hit save to draft. Finished it but now can't publish the saved entry. What am I missing? Also, I swear I could post my blog entries to Facebook, but don't see this option anymore either.

    Signed,
    Still using a rotary phone in New Jersey.:tb-confused:
     
  2. Mark Watson

    Mark Watson TrainBoard Member

    6,002
    1,267
    85
    I'm not a blogger so sorry I don't have a specific answer.

    Maybe you can select the text of the draft and try posting it via a new entry?
     
  3. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    63,505
    10,521
    652
    I can't think of any suggestions. I only have a few posts to my little blog, and all have gone well. Hopefully I did not just jinx myself....

    :tb-wacky:
     
  4. Jim Wiggin

    Jim Wiggin Staff Member TrainBoard Supporter

    4,870
    2,620
    94
    Mark, sometimes the simplest explanation is the key to success. I did what you said and it's up now. Not only that but it is currently annoying all of my friends on Facebook. Thanks Mark!

    Ken, knock on some wood, you should be fine!
     
  5. PW&NJ

    PW&NJ TrainBoard Member

    1,201
    15
    23
    For Jim (and anyone else that wants/needs to know), to change a post from Draft status to Live, here's what you do.

    1- Edit your post (put your mouse over the bold title and a little pencil will show up to the right. click on the pencil to edit)
    2- Once in edit mode, scroll down to below your message text. You'll notice a section called "Additional Options".
    3- Within that section is a subsection called "Miscellaneous Options" with an option for "Publish Status". Change it from "Draft Blog Entry" to "Publish Now", then click "Save Changes" and you're all set.

    Note: Also, if you edit and end up in the simple-mode editor, you'll need to press the "Go Advanced" button to get to these features.
     
    Last edited by a moderator: Sep 5, 2011

Share This Page