While I was working on my …. ….. truck stop project above and ( HERE ) it was mentioned that it needed a NAPA Auto Parts store for the truck repair. I took the restaurant building from the truck stop complex and changed the entrance around to what you might be more likely to find on a restaurant or a store or other commercial building. I haven't printed the building out but did print the restaurant that it is base on so feel that the print files should be fine. Saying that if you print this building please take a moment and send me a picture or two ( HERE ). It might end up on this page. I also changed the roof on this building to a pitched roof. I left the lower supports in for a flat roof so it could be changed to a flat roof if one so desired. The two windows above on the right are where two restrooms would be. Besides the front door there are also two side doors. I also put a brick front on the building as an option. The print files are there for both the brick and the wood siding front. . A number of options for what type of business they could be used for. You can find the files to print this on my thingiverse account ( HERE ). You can find all the files to 3D print this object and others on my thingiverse.com account ( HERE ). Sumner
A resource that worked great for me was Google Streetview. I found buildings I wanted to recreate in Streetview and took screenshots of them. I used the screenshots as a Canvas in Fusion 360 and drew over them to create the buildings. Here's a sample of some buildings from College Avenue in State College, Pa. https://www.thingiverse.com/thing:5461328. These are for TScale (1:450).
