Through The Looking Glass

Tracy McKibben May 25, 2013

  1. Tracy McKibben

    Tracy McKibben TrainBoard Member

    1,181
    93
    24
    How thick (or thin) is 0.007 inches? Not very darned thick. How much effort does it take to break a piece of glass 0.007 inches thick? Not very darned much.

    During the convention last week, I spent more time teaching than learning, but I still managed to pick up a new "trick". Not so much a trick really, more of a "I didn't know that existed!" thing. Jimmy Simmons from Monster Model Works tipped me off to the use of REAL GLASS for model windows. I've always used some sort of clear plastic or clear cellophane for my windows, but no more! After seeing one of Jimmy's models that uses real glass in the windows, I came straight home and ordered some for myself.


    For just under $7, you can get 55 pieces of glass, 1" wide, 2 inches long, and 0.007" thick. You don't realize how delicate this stuff is until you have it in your hands. Sneeze, and you've broken it.

    [​IMG]

    It cuts just like normal-sized glass. There is a miniature scribing tool which is used to scribe a line in the glass, and then you just snap it off. Seems easy enough, right? After utterly destroying the first two pieces that I tried to cut, I was finally able to cut out the pieces to finish this model.

    [​IMG]

    So what's the big deal? Look at the reflections in the windows. Just like "real" glass. You can't get that effect using plastic.

    [​IMG]

    I'll get lots of practice at cutting this stuff, because the next structure I build will be the Lakeside Inn and its 57 scratch built windows, each using real glass.
     
  2. Shortround

    Shortround TrainBoard Member

    3,608
    3,260
    87
    Cool! They have some other interesting stuff as well.
     
  3. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    65,633
    16,489
    653
    Hmmmm. Very interesting! I am guessing nothing special for adhesive was needed, and you mounted these using CA?
     
  4. Tracy McKibben

    Tracy McKibben TrainBoard Member

    1,181
    93
    24
    Actually, no, I used canopy glue. I think the vapors from CA would fog the glass.
     
  5. gregamer

    gregamer TrainBoard Supporter

    1,258
    375
    31
    Wow! They look fantastic. I'd be worried about breaking them after installation too, but hey that might even leave a real cool effect.


    Greg Amer
    The Industrial Lead
    gregamer.com
     
  6. Candy_Streeter

    Candy_Streeter TrainBoard Member

    2,523
    5,471
    70
    I use real glass as well. It looks so much better.
     

Share This Page