All the BCR stock went to CNR as they bought out BCR. CPR didn't take over any of the lease units that BCR had. Some were re-numbered and had the...
Yes but have you noticed that when they roll of your work space they always head for a foot. I moved my foot so it wouldn't hit it and it went...
No, actually that is what I was looking for. Thank You for the response and help Jim
I realize that the track polarity determines the direction but on the engine which side picks up the positive and which pick up the negative in...
Is the right side or right power pick-up always used as the forward (positive if you want to call it that) position? Thanks in advance
Did CPR ever use the PB-1 'B' units and if so on what :confused: - passenger or freight. Also what were they used in conjunction with - engine...
Well for some reason it dumps and everything I've done is gone. I've tried a re-install, Defraged the drive then re-installed but it still dumps....
Yes, I've heard about using it but how well does it hold spikes when handlaying track? I would think it might be alright as long as a person used...
If you don't use the diode/s and just use the resistor with a 3V LED in a DC system will anything happen to the LED when you reverse direction?...
What were the main years for the use of this colour?
What is the time frame for CPR using the green painted rolling stock, mainly the box cars but I have seen other cars also painted green. Also...
Are these manned helpers? Or do they have remote control equipment? :D Boxcab E50 [/b]</font> No, I'm afraid they aren't manned helpers but...
There are CA bebonders that will not affect plastic. Check with your LHS, they should have it or be able to get it for you.
Ok, here's a stumbler - I think. I just got back into the hobby after a rather long vacation; now the question - Layout frame work is 1x4 wood...
They use them here in Medicine Hat even for switching; I think it's because of the 2, long steep grades. I've also seen single units pulling grain...
Try this web site for repowering you locomotive http://www.alliancelink.com/alp/
Most of the press on letters from a stationary store are vinyl and are rather thick, go to a drafting supply store and you can get all types of...
Have you tried 99% alcohol, It will remove most paints applied by the manufacturer. If you can't get 99% pure alcohol then the next best thing is...
OK, here's a question that will put a different light on DCC. If money was no object what radio DCC system would you buy and what decoders would...
Does anyone know of a way to stop the white spots :mad: [img] you get when using Dullcoat; I know; quit using Dullcoat. If this is the only...
