Just another direction to check, are all/any of the rail joints soldered? Are there any feeders for track power? The conditions you mention could...
Try this link...you will have to register for a free account to use it but this is the old index you spoke of updated and recompiled....
I think this is a great idea, but I would like to know now before I spend $200 how MR is going to handle updates. The DVD is only up to 2009 so...
Try this site, very good info on preparing lichen and coloring it as well if you like. Good luck and have fun. TerraGenesis: Lichen - Preparation...
Here is what I have used and they work very well. And if you have wire coat hangers "hanging" around (pun intended) they are free. Rob Paisley...
If all else fails MEK will clean the old dried paint off your airbrush. It will clean enamel, laquer and acrylic based paints. Just be sure to...
I just looked at the "Yard Office" site and there are several extra features you can get if you register the SW for $27. One of the 10 or so...
This works fine as long as you don't mistakenly leave the program track selected and try to run a loco up onto the program track section. This...
Got this off the MS web site. Looks like it WILL run on XP as well, but looks like better performance may be gained by having Vista. PeteC Q:...
I use a small APC UPS with surge protection...This really helps to isolate the equipment. I did this because I had a similar problem as you back...
I agree with Doug, at this point you really need to disassemble it to see what's binding. It could be any one of the gears, or it could be as far...
Craigs list started off being local only but has now grown to being international. PeteC
Here are several sites that have info on airbrushing. The first four are railroad releated the others are model related, airplanes and tanks, but...
Try this link.... PeteC NMRA - RP-20.1 Car Weight
If you are talking about the standard blue box Athearn sintered metal wheels I can probably help you out. I have quite a few pairs left from...
Don't be too hard on Soundtraxx, they are not the only DCC Sound manufacturer that is experiencing similar problems with many DCC systems. Most...
Here is what I came up with as a solution that I have been using for years. It is rock solid and has not failed me once in 15 years...The wiring...
You didn't mention which decoder you are using but the standard is a common + (blue wire) and the other wires, in this case white and yellow are...
RWC, ----------------- The situation I envision - train enters loop facing points thrown toward left diverging route. Train takes the left...
Enzo, I have been following this thread and am glad you got it figured out. The fuse is a good idea for protecting the decoder, except as you...
